Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Tail light

Today we will explain how to replace the rear lights of the Audi A3 model 8v independently. To perform the replacement of the lights, we need to open the trunk of the car and remove the tailgate panel; to remove the panel, we need to use a 13mm Torx key and a plastic removal tool. After removing the panel, we remove the lights and insert the new ones after also inserting the bulbs inside the light fixture. We mount the tailgate panel and continue with the replacement of the lights on the rear bumper. We unscrew the screws on the sides and remove the lights. We insert the bulbs inside the light fixture of the new light and proceed with the assembly.

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights in the Audi A3?
How to replace the rear lights in the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial, we can see how to replace the rear lights on the Audi A3, an extremely simple and quick operation. First of all, make sure that the…
How to disassemble the rear lights in the Audi A3?
How to disassemble the rear lights in the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) In this tutorial we can see how to disassemble the rear lights on the Audi A3, an extremely simple and quick operation. First of all, make sure that …
How to Repair a Faulty Headlight Adjustment System on an Audi A3 8P?
How to Repair a Faulty Headlight Adjustment System on an Audi A3 8P?
Audi A3 (2003-2013 / MK 2, 8P) The purpose of this video tutorial, which is also well described verbally, is to show the installation of the headlight height adjustment wheel for x…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos