Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection indicator on the Audi A3 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

In this article, we will see how to reset the maintenance light of the Audi A3 8P, in case it remains on even after performing the vehicle maintenance. The procedure takes less than 1 minute to be carried out and completed. First, you need to turn on the ignition, but without starting the engine, after which you need to push and hold down the button on the right of the dashboard monitor. When the service light appears, release the button and push it down again, holding it down to perform the reset, wait about 5 seconds and release the button and turn on the ignition again. Now the procedure will be complete.

Posted on 26 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Inspection on the Audi A3
How to Reset the Inspection on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In this video, you will learn how to reset the inspection on the Audi A3 8V using the module. Start the ignition by turning the key to position 1 or …
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) When you want to independently reset the service light, related to the maintenance, on an Audi A3 vehicle, you need to use a diagnostic tool. Once pu…
How to Replace the Front Headlight Bulbs on an Audi A3
How to Replace the Front Headlight Bulbs on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replace the bulb mounted in the (left front) headlight on an Audi A3. Open the bonnet and secure it; locate the rear of the headlight, remove the rub…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos