Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front windshield wipers of the Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Windshield wipers

Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Audi A4, in simple and quick steps. First of all, lift the front wiper arm, then unclip the plastic clip of the wiper (using something thin and pointed like a screwdriver); then rotate the wiper blade to remove it from the arm, as shown in the video. At this point, install the new wiper blade, fixing it correctly on the arm; gently lower the arm and proceed in the same way with the replacement of the other front wiper!

Posted on 31 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement windshield wipers Audi A4 Avant
Replacement windshield wipers Audi A4 Avant
Audi A4 (2004-2008 / B7) In this video we will see how to replace the front wiper blades of the Audi A4 Avant B8. First we go to raise our old brushes: now (depending on the …
Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement
Audi A4 (2000-2004 / B6) Replacing windshield wiper blades is very simple and requires no special tools other than a basic screwdriver. Before proceeding with the replacement…
How to replace the rear wiper in the Audi A4 Avant?
Audi A4 (2004-2008 / B7) Replacing the rear wiper in the Audi A4 B7 Avant is an extremely simple and fast operation, let's see how to proceed in the attached video tutorial. …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos