Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Audi A3 e-tron remote control

Model: Audi A4 B9 - Years 2014-2024
Part: Key

In this video we can see how to change the battery of the Audi A4 e-tron remote control: first, turn the remote control and press the metal button located on the back, pulling out the emergency physical key. Using a small screwdriver, lever the bump on the back of the remote control; if necessary, push it out by levering from the hole left by the key we removed. This will reveal the button battery, which is a common CR2032 easily available at any supermarket or electronics store for a few euros, and replace it paying attention to the polarity. Close the cover and put the physical key back in its place. And that's it.

Posted on 24 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Fob Battery for Our Audi A4
How to Change the Key Fob Battery for Our Audi A4
Audi A4 (2004-2008 / B7) How to change the key fob battery for our Audi A4? Let's see in this video how to do it in detail. Take your key fob and press the metal key extracti…
How to Change the Key Fob Battery of an Audi A4
How to Change the Key Fob Battery of an Audi A4
Audi A4 (2014-2024 / B9) How do you change the battery of the key fob for an Audi A4? Let's see in detail how to do it: take your key fob and press the button to release the …
Replace the Key Fob Battery on Audi A4 B6
Replace the Key Fob Battery on Audi A4 B6
Audi A4 (2000-2004 / B6) Let's go through the steps to disassemble and replace the key fob battery on the Audi A4 B6, second generation, in simple and quick steps. First, tak…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos