Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part:

In this tutorial we can see how to reset the tire pressure warning light in the Audi Q3, an extremely simple and quick operation, to be done only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, go inside the cabin, then insert the key and turn on the instrument panel. Then press the "CAR" button on the central console, go to "Servicing & checks", "Tire pressure monitoring", and perform the reset by selecting "Store tire pressures". To complete the procedure, simply restart the vehicle.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Audi Q3?
How to reset the tire pressure light on the Audi Q3?
Audi Q3 (2018-2025 / F3) In this tutorial, we can see how to reset the tire pressure indicator in the Audi Q3, an extremely simple and quick operation, to be carried out only…
How to reset the tire pressure light in the Audi Q3?
How to reset the tire pressure light in the Audi Q3?
Audi Q3 (2011-2018 / 8U) .. In this tutorial we can see how to reset the tire pressure light in the Audi Q3, an extremely simple and quick operation, to be carried.. …
How to Reset the Tire Light on the Audi Q3?
How to Reset the Tire Light on the Audi Q3?
Audi Q3 (2011-2018 / 8U) In this tutorial, you will learn how to reset the tire light on the Audi Q3, a very simple and quick operation that should only be done after restori…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos