Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

On the instrument panel of the Audi A3, it will be possible to make the Service light disappear completely by inserting the key into the appropriate lock, so that the instrument panel lights up. Now you will need to press the button located immediately below the speedometer, to the right of the small central display on the instrument panel. By holding down this button, it will be possible to reset both the maintenance intervals and the oil replacement intervals. Once these intervals have been reset, you can turn the key, turning off the instrument panel and confirming that the light is off when it is turned back on.

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To reset the Service light on an Audi A3, turn on the instrument cluster and navigate through the menu on its display by turning the knob on the righ…
How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The procedure to reset the Service light on an Audi A3 involves turning on the ignition by rotating the key in the ignition switch, then locating the…
How do you reset the Service light on the Audi A3?
How do you reset the Service light on the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) It will be possible to reset the Service light on the instrument panel of the Audi A3 by turning on the instrument panel, turning the key in the corr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos