Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the fuel pressure regulator of the Audi TT 1.8T

Model: Audi Tt 8N, MK 1 - Years 1998-2006

Today we will discover the instructions that will allow us to disassemble and replace the fuel pressure regulator of the Audi TT 1.8T. First, we open the hood of the car and start locating the pressure regulator, which is found on the top of the engine, next to the injection system; then we disconnect the inlet and outlet pipes, unscrewing the screws to remove it, as shown in the video. At this point, we replace the component with the new one, installing the original one, and then connecting the pipes to the pressure regulator.

Posted on 6 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure on Audi TT
How to reset the tire pressure on Audi TT
Audi Tt (2014-2023 / MK 3, 8S) Today we will see how to reset the tire pressure on an Audi TT, third series model in production from the year 2014 to the year 2023. Before performi…
How do you reset the tire pressure warning light on the Audi TT?
How do you reset the tire pressure warning light on the Audi TT?
Audi Tt (2006-2014 / 8J, MK 2) In order to reset the tire pressure warning light on the Audi TT, you will need to first inflate the tires until they are brought back to the optimal…
How to reset the TPMS light on the Audi TT
How to reset the TPMS light on the Audi TT
Audi Tt (2014-2023 / MK 3, 8S) The tire pressure reset on Audi TT vehicles is a simple and quick operation to perform in just a few minutes. We remind you that before performing th…

How to Replace the Right Fog Light Bulb on a Ford Fiesta

Replacing the fog light bulb on the passenger side, which uses an H11 fitting (the bulb holder also integrates the connector for the power supply), can be done either by accessing from underneath the vehicle by removing some covers, or more simply by dismantling the headlight. Once the headlight is removed, it is easy to reach the fog light housing and release the bulb by rotating the entire bulb holder. Disconnect the connector, connect the new bulb, and insert it into the bulb holder, rotating it until it locks in place.

Watch the video!


by ScegliAuto

More videos