Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on the Audi TT 8J

Model: Audi Tt 8J, MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Welcome to this article where we will illustrate how to reset the service light of the Audi TT 8J. For this operation, no tools are needed, and we recommend doing it only after having performed the service. To reset this light, you need to turn on the instrument panel without starting the engine, then pull out the lever located to the right of the panel, release it, and then pull it again, holding it pulled for 5 seconds.

At the end of the 5 seconds, the light will be reset. At this point, turn off and on the panel to verify that the procedure has been carried out correctly.


Posted on 24 July 2025 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on an Audi TT MK2
How to Reset the Maintenance Light on an Audi TT MK2
Audi Tt (2006-2014 / 8J, MK 2) In today's article, we will see how to reset the maintenance light on the Audi TT MK2. To reset this light, first, turn on the instrument cluster wit…
How to Reset the Service Light on an Audi TT
How to Reset the Service Light on an Audi TT
Audi Tt (2006-2014 / 8J, MK 2) To reset the service light on an Audi TT, insert the key and turn on the ignition without starting the engine. On the instrument cluster, locate the …
How to reset the "Service" light on an Audi TT?
How to reset the "Service" light on an Audi TT?
Audi Tt (2014-2023 / MK 3, 8S) To reset the "Service" light on an Audi TT, turn on the ignition without starting the engine. Use the controls on the steering wheel to access the on…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos