Do it yourself
Frequently asked questions about cars and motorcycles

How to manually close the roof of an Audi TT

Model: Audi Tt 8J, MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Convertible top

See other generations:
Video tutorial

Let's see how to manually close the roof of the Audi TT: first, we need to find the hydraulic system release valve, which is located under a slot in the trunk carpet, on the passenger side. We need to insert a screwdriver and turn it 1/4" counterclockwise to release the pressure.

We then need help from another person to open the side deflector. We need to unlock the motorized rods (which have a ball joint) and lift the deflector into the open position.

We will secure the rods in the clips to avoid damage. We then manually close the roof.

Again, with two people, lift the roof into the closed position (being careful not to pinch fingers!). Now remove the rubber cap in the center of the roof; screw the closing tool into the motor until fully engaged, without forcing it. Pull downwards to disengage the gear from the motor; insert the end into the locking motor, and turn counterclockwise to open the locks.

Now turn clockwise to close and lock the roof.

Reassemble the components by reinserting the gear and unscrewing the tool: Reattach the rubber cap and you're done.


Posted on 28 July 2025 by ScegliAuto


Related tutorials

Audi Tt (2014-2023 / MK 3, 8S) Today we will explain how to replace the roof of the Audi TT in a simple and fast way. To carry out this operation, we need to get on board the car a…
Audi Tt (2006-2014 / 8J, MK 2) In this video, we see how to solve the well-known problem of the convertible top on an Audi TT: the roof gets stuck in the open or closed position an…
Audi Tt (2006-2014 / 8J, MK 2) Before you begin, open the trunk of your Audi TT. Using a flathead screwdriver, pry off the lock cover of the trunk. Next, remove the screws securing…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos