Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi S6 2018 key

Model: Audi A6 C8, MK 5 - Years 2018-2026
Part: Key

When the smart key of your Audi S6 (2018) suddenly stops working, it is very likely that it is time to replace the small button battery located inside. In the following mini guide, we will describe all the steps you need to take to complete the operation quickly and safely. First of all, remove the metal top part of the cover, then remove the battery holder and then remove the exhausted battery. Once you have done this, insert the new battery and reassemble the various components correctly.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of the Audi A6
How to Replace the Key Fob Battery of the Audi A6
Audi A6 (2019-2026 / ) In today's video, learn how to replace the key fob battery for the latest Audi A6 model. This video also applies to other Audi models, including A7, …
How to Replace the Key Battery on an Audi A6
How to Replace the Key Battery on an Audi A6
Audi A6 (2011-2018 / C7, MK 4) First, detach the physical key from the electronic key of your Audi A6 by pressing the release button located on the upper section. Start by extracti…
How to replace the battery of the Audi A6 key.
How to replace the battery of the Audi A6 key.
Audi A6 (2011-2018 / C7, MK 4) If the battery of your Audi A6 key has stopped working, don't worry because in the following guide you will find all the steps you need to follow in …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos