Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rearview mirror of the Audi A6 c7?

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

The external and electric rearview mirror, observable in the video presentation available here, gives us an idea about the car mentioned. The disassembly of it is done as described below: After obtaining a bodywork lever and a small flathead screwdriver, we start the work by disconnecting the internal mirror from the base contained in the body, gently levering it, then the aforementioned base must be detached by pressing on the plastic fasteners present and to finish, we disconnect the connectors of the electrical cables that power the mirror itself.

Work completed.


Posted on 9 August 2025 by ScegliAuto


Related tutorials

How to Replace the Turn Signal Light in the External Rearview Mirror of an Audi A6
How to Replace the Turn Signal Light in the External Rearview Mirror of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) This guide provides instructions to remove and replace the light and lens of the turn signal in the external rearview mirror of an Audi A6. First, mo…
How do you disassemble the rearview mirror of the Audi A6 C7?
How do you disassemble the rearview mirror of the Audi A6 C7?
Audi A6 (2011-2018 / C7, MK 4) The reasons for disassembling the rearview mirror of a car, focusing here on the external one, are various, but undoubtedly one of the most likely is…
How to Replace the Outside Mirror on an Audi A6
How to Replace the Outside Mirror on an Audi A6
Audi A6 (2018-2026 / MK 5, C8) Today, follow these step-by-step instructions to remove and replace the outside mirror on an Audi A6. First, open the front door and begin removing t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos