Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Mirror on an Audi A6

Model: Audi A6 MK 5, C8 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

See other generations:
Video tutorial

Today, follow these step-by-step instructions to remove and replace the outside mirror on an Audi A6. First, open the front door and begin removing the door panel by taking off the plastic cover of the handle and unscrewing all the mounting screws located underneath and on the sides of the door panel.

Once removed, unscrew the mounting screws of the mirror and disconnect its adjustment electrical connector, as shown in the video.

At this point, install the new outside mirror, finally adjusting the glass!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Rearview Mirror on the Audi A6?
How to Replace the Outside Rearview Mirror on the Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To replace the outside rearview mirror on the Audi A6, detach the door panel to access the mirror mounting screws. To remove the panel, pull out the …
How to Replace the Outside Rearview Mirror on an Audi A6?
How to Replace the Outside Rearview Mirror on an Audi A6?
Audi A6 (2011-2018 / C7, MK 4) To replace the outside rearview mirror on an Audi A6, pry under the glass to remove it from the housing by disengaging the clips underneath. Once the…
Replacing the Glass of the Audi A6 Exterior Rearview Mirror
Replacing the Glass of the Audi A6 Exterior Rearview Mirror
Audi A6 (2004-2012 / C6, MK 3) Today, follow the step-by-step instructions on how to remove and replace the exterior rearview mirror glass of the Audi A6. First, open the front doo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos