Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Service warning light

Today we will explain how to reset the service light on an Audi A3 model 8P. Resetting the light is a simple operation that can be done independently without the use of any special equipment. Turn on the instrument panel and press the button on the display to start the reset procedure. Rotate the same button to the left and right to complete the update of the light. Once the reset is complete, restart the instrument panel to save the changes. If the reset is unsuccessful, it is necessary to go to an authorized workshop to have a software check of the control unit performed.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the service light on an Audi A3 vehicle independently. The reset should be done only after performing the operatio…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) After changing the engine oil and oil filter, it will be necessary to reset the service light; let's see the procedure for resetting the maintenance …
How to reset the tire pressure light in the Audi A3?
How to reset the tire pressure light in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial we can see how to reset the tire pressure warning light in the Audi A3, an extremely simple and quick operation, to be carried out o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos