Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the traction control of the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Checks and maintenance

For illustrative purposes, we will see how to deactivate the traction control of the Audi Q3; it is recommended to always keep this system active to ensure a higher level of safety. First, we get into the vehicle and start the instrument panel and the engine; then we press the traction control button found at the bottom of the central instrumentation, as shown in the video. Once the traction control is deactivated, we will see the corresponding warning light appear on the instrument panel; by pressing the button again, we will reactivate this system.

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Audi Q3 (2011-2018 / 8U) In this tutorial, you will see how to disable the Pre Sense system in the Audi Q3, a very simple and quick operation to perform if you find it too in…
Audi Q3 (2011-2018 / 8U) In this tutorial we can see how to deactivate the passenger airbag in the Audi Q3, an extremely simple and quick operation, to be carried out necessa…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos