Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Original Radio from the Audi A3 and Install a Touch Screen Radio

Model: Audi A3 Sportback MK 2 - Years 2003-2013
Part: Car stereo

Today, you will learn how to remove the original radio from your Audi A3 Sport. First, take your release keys and insert them into the slots located to the right of the radio, one at the top and one at the bottom. This will unlock the radio, allowing you to pull it out. Disconnect all the cables connected to it. Now, you can insert your new radio. Connect all the cables carefully, and before fitting it, turn it on to ensure everything is working properly. Insert it and make sure it clicks into place.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Reversing Camera on the Audi A3
How to Install the Reversing Camera on the Audi A3
Audi A3 Sportback (2012-2019 / MK 3) To install a complete original kit for the rear reversing camera, including cables and wiring, on an Audi A3, start by going to the rear of the vehic…
How to Install Roof Bars on an Audi A3 Sportback
How to Install Roof Bars on an Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) In this brief guide, follow the steps to install roof bars or roof racks on an Audi A3 Sportback, following the instructions below. First, obtain the…
How to Install the Tow Bar on the Audi A3 Sportback
How to Install the Tow Bar on the Audi A3 Sportback
Audi A3 Sportback (2003-2013 / MK 2) To install the tow bar on an Audi A3 Sportback, start by removing the rear lights (outer lights), then remove the rear bumper and the rear longitudin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos