Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the external rearview mirror of the Audi A3?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

See other generations:
Video tutorial

It will be possible to replace the external rearview mirror of the Audi A3 by prying with an object to detach the triangular internal trim panel at the top of the door panel: once it has been removed, the underlying screws can be located and loosened.

It will then be possible to disconnect the connectors located inside so that the mirror can be completely removed; after removal, the new mirror can be inserted.


Posted on 26 January 2026 by ScegliAuto


Related tutorials

How to disassemble the external rearview mirror of the Audi A3
How to disassemble the external rearview mirror of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The instructions provided in this guide will show us the process of disassembly and replacement of the external rearview mirror of the Audi A3. First…
How to replace the external rearview mirror of the Audi A3
How to replace the external rearview mirror of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In these short and simple steps, we will see the process of disassembling and replacing the external rearview mirror of the Audi A3. First, open the …
Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos