Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A4 B6/B7

Model: Audi A4 B7 - Years 2004-2008
Part: Service warning light

Let's see how to reset the service light on an Audi A4 B6/B7: this is a very simple procedure that takes only a few seconds. Turn on the ignition and on the instrument cluster, locate two buttons: the one with the wrench icon on the left and the "0.0" button on the right, which is used to reset the trip odometer. Now press and hold the button with the wrench icon, and while holding it, start the engine: while still holding the first button, also press the "0.0" button. At this point, the service light should reset immediately. You can release the buttons.

Posted on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
How to reset the "Service" warning light on an Audi A4
How to reset the "Service" warning light on an Audi A4
Audi A4 (2004-2008 / B7) Let's start by sitting in the driver's seat of our Audi A4. Then we will have to activate the instrument panel, inserting the key in the appropriate …
How to Reset the Service Light on an Audi A4
How to Reset the Service Light on an Audi A4
Audi A4 (2000-2004 / B6) How to reset the service light on an Audi A4. This operation is very simple. Enter the vehicle, turn on the ignition, and check that the light is on.…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos