Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Remote Battery of the Audi A3

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: Key

Briefly, here are the instructions to remove and replace the battery of the key remote for the Audi A3. First, take your remote and start by removing the physical key from inside it; use a lever on the gap created to remove the rear plastic cover, thus accessing the battery compartment, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type (in this case, a CR 2032 3V); insert it in the correct orientation and finally reinsert the physical key.

Posted on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Audi A3 Remote Control Battery?
How to Replace the Audi A3 Remote Control Battery?
Audi A3 (2012-2019 / 8V, MK 3) To replace the remote control battery of the Audi A3, lift the cover on the back of the remote, located just below the manufacturer's logo. By removi…
How to Replace the Key Fob Battery on an Audi A3
How to Replace the Key Fob Battery on an Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) Replacing the battery in the key fob of an Audi A3 is a simple and quick operation. Take the key fob and first press the button located near the uppe…
How to Replace the Key Fob Battery in an Audi A3
How to Replace the Key Fob Battery in an Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) The procedure for replacing the battery in the key fob of an Audi A3 requires a few simple steps. First, extract the metal key from inside the fob: t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos