Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Distribution in an Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Fuse box

In this useful video guide, you can see all the diagrams of the fuse boxes in an Audi Q5, first generation model produced from 2008 to 2017. The video shows all the schematics precisely detailing the name, location, and operating amperage of each relay and fuse in your vehicle. It also displays the locations of the fuse boxes. The first two fuse boxes are located on either side of the dashboard, behind plastic panels that need to be removed. The third fuse box is located in the trunk on the right side, also behind an upholstery panel that must be removed as shown in the video.

Posted on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Audi Q5 located?
Where is the fuse box of the Audi Q5 located?
Audi Q5 (2008-2017 / MK 1, 8R) Audi vehicles always have two fuse boxes inside. In Audi Q5 vehicles, there are two fuse boxes located in the same positions as in Audi A4 and Audi A…
Fuse box and positioning of fuses in the Audi Q5
Fuse box and positioning of fuses in the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Today's instructions will show us the positioning and the fuse layout of the Audi Q5. Firstly, we open the front driver's side door and start removin…
Location and Diagram of Fuse Box on Audi Q5 8R
Location and Diagram of Fuse Box on Audi Q5 8R
Audi Q5 (2008-2017 / MK 1, 8R) In today's video, you will see the two different locations of the internal fuse boxes and their diagram for an Audi Q5 8R. Access the interior of the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos