Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Mirror Cap of the Audi A5

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Side mirror

Removing the cap of the external rear-view mirror on this car model is not complicated, but care must be taken to avoid damaging the press-fit inserts. Start by removing the mirror, which is clipped onto its support. Rotate the mirror fully outward and then lever at the back to disengage it, disconnecting the wires of the demisting system afterwards. At this point, unscrew the screws securing the cap to its support and proceed with the complete removal by rotating it upwards from the front.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) Before starting, exit your Audi A5 and approach the external mirror. Begin by pushing the mirror to the right to create a gap on the left side. Then,…
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) This guide explains how to remove and replace the external wing mirror of the Audi A5 by following these simple and quick steps. First, open the fron…
Audi A5 (2018-2025 / 8W6) Below we will see the steps that will allow us to disassemble and replace the external rearview mirror of the Audi A5, following the instructions pro…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos