Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A5 with VCDS Software

Model: Audi A5 8T8, 8T3, 8T, 8F - Years 2007-2016
Part: Service warning light

Today, we will discover the steps to reset the service light for routine maintenance on an Audi A5 using VCDS software. First, get inside the vehicle and connect your diagnostic tool to the OBD port, turning on the ignition. Then select the make and model of the vehicle, following the procedure on the tool to confirm and execute the reset of the routine maintenance light. Finally, disconnect the tool from the diagnostic port, verifying the reset of the counters on the central display.

Posted on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Audi A5
Resetting the Service Light on the Audi A5
Audi A5 (2007-2016 / 8T8, 8T3, 8T, 8F) This guide briefly outlines the instructions to reset the service light for the routine maintenance oil change on the Audi A5. First, get inside the …
How to Reset the Tyre Pressure Light on an Audi A5
How to Reset the Tyre Pressure Light on an Audi A5
Audi A5 (2025-2026 / B10) In this tutorial, we will see how to reset the tyre pressure light on an Audi A5, a very simple and quick operation, to be performed only after resto…
How to Reset the Service Light on an Audi A5
How to Reset the Service Light on an Audi A5
Audi A5 (2018-2025 / 8W6) In today's video, you will see how to reset the service light in just a few simple steps on an Audi A5, a model produced from 2018 to 2025. So, let's…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos