Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulbs on an Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight bulb

Replace the headlight bulbs if they are burned out. Here’s how to do it. Open the hood by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlight (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips. Install the new bulbs after removing the old ones (always use the correct type and size). Insert the bulb holder into the headlight housing. Close the headlight caps. Turn on the ignition and operate the light switch.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…
How to Remove the Tail Light Bulbs on an Audi A4
How to Remove the Tail Light Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Is the tail light on your A4 out? Here's how to replace the bulbs. Lift the trunk and secure it. Remove the fabric cover that hides the access to the…
How to Change the Headlight Bulbs on an Audi A4
How to Change the Headlight Bulbs on an Audi A4
Audi A4 (2004-2008 / B7) Let's see how to change the headlight bulbs on an Audi A4. Open the hood by pulling the lever located at the bottom left of the dashboard; secure it.…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos