Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on an Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Service warning light

Before you begin, sit in the driver's seat of your Audi Q5. Start by activating the instrument cluster by turning the key in the ignition switch. Next, press the "CAR" button, and then select "Service Interval Display". At this point, select "Reset" and confirm. Once you complete this step, the "Service" light will turn off automatically, and you will have successfully reset the "Service" light on your Audi Q5.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on an Audi Q5?
How to Reset the "Service" Light on an Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) Before you begin, sit in the driver's seat of your Audi Q5. Start by activating the instrument cluster by simply turning the key in the ignition swit…
How to Reset the "Service" Light on an Audi Q5
How to Reset the "Service" Light on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Before you begin, sit in the driver's seat of your Audi Q5. Start by activating the instrument cluster by pressing the ignition button. Next, select …
How do you reset the tire pressure warning light on the Audi Q5?
How do you reset the tire pressure warning light on the Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) In order to reset the tire pressure indicator of the Audi Q5, you need to turn on the instrument panel by pressing the appropriate button located on …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos