Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Battery

Lift the hood and ensure it stays in position. Remove the plastic panel shown in the video by hand. Unscrew and then disconnect the negative terminal of the battery (always remember to start with the negative terminal) and only then repeat the process on the positive terminal (you need to remove the plastic cover first). You will need a 10 mm wrench for both terminals. Disconnect the battery cable and unscrew the bolt that secures the battery to the bracket. Once done, lift the handles and remove the battery. Proceed in reverse for the installation of the new battery.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Battery on Audi A4
Replacing Battery on Audi A4
Audi A4 (2007-2016 / B8) In this video, see how to remove and replace the battery on an Audi A4 B8. First, locate the battery in the trunk; then open the trunk lid and lift t…
How to Replace the Key Battery in an Audi A4
How to Replace the Key Battery in an Audi A4
Audi A4 (2014-2024 / B9) Start by pressing and holding the button located on the back of the key fob for your Audi A4 to extract the physical key. Once you have removed the p…
How to Replace the Key Battery of an Audi A4?
How to Replace the Key Battery of an Audi A4?
Audi A4 (2004-2008 / B7) Start by pressing and holding the button on the top side of the key fob of your Audi A4, which will open the physical key. Then, using a flathead scr…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos