Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Car stereo

To remove the original car radio, you first need the appropriate extraction keys: insert the keys into the slots located at the four corners of the radio with the notches facing inward; press the keys until the retaining springs disengage and pull the radio forward (push the gear shift lever back) while disconnecting the corresponding plugs. Before disconnecting, verify that you have the activation code needed for the subsequent reactivation of the radio.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the component protection of the radio system in the Audi A6 3.0 TDI
How to deactivate the component protection of the radio system in the Audi A6 3.0 TDI
Audi A6 (2004-2012 / MK 3, C6) Today we will see the main instructions that will allow us to deactivate the protection of the radio components of the Audi A6 3.0 TDI. In order to c…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Audi A6 (1997-2004 / MK 2, C5) To remove the factory car radio, you need the appropriate extraction keys to insert into the slots located at the four corners of the radio. Insert t…
How to dismantle the antenna of the Audi A6
How to dismantle the antenna of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) Below we will see the instructions that will allow us to disassemble and replace the car radio antenna of the Audi A6. First, we open the rear door o…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos