Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the window control panel on the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Power window switch

In this video tutorial we will see how to disassemble and replace the window control panel on the Audi A4 B8, in simple and quick steps. First of all, open the front door and use thin plastic levers to gently remove the side of the push-button panel; after which we lever on the sides of the push-button panel to unhook and remove it, disconnecting the electrical connector that we find below. At this point, replace it with the new one, of the right type, thus connecting the electric cable; let's insert it perfectly in place and reassemble everything, applying the reverse procedure!

Posted on 9 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the power window switch of the Audi A4
How to replace the power window switch of the Audi A4
Audi A4 (2004-2008 / B7) Today we will see the steps that will allow us to disassemble and replace the switch and window switch panel of the Audi A4. First, we open the front…
How to repair or replace the window lifting mechanism of the Audi A4
How to repair or replace the window lifting mechanism of the Audi A4
Audi A4 (2004-2008 / B7) Today's brief instructions will show us the process of disassembly and replacement (or repair) of the window regulator mechanism of the Audi A4. Firs…
Removing the window control panel on Audi A4
Removing the window control panel on Audi A4
Audi A4 (2004-2008 / B7) Removing the push button panel of an Audi A4? Let's see how the window lifter buttons are removed. We remove the satin aluminum molding placed in the…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos