Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Audi A3 low beam replacement

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Headlight
Operation: Audi A3 low beam replacement

Do not insert the ignition key, raise the bonnet and put on the special support rod and, for safety, disconnect the battery. Remove the rear cover of the headlight and, going a little blindly (unfortunately, visibility is very bad on this model) and disconnect the connector with the attached dipped beam bulb: to detach the bulb as well, just pull it with a little force , being in place only thanks to the interlocking hooks. Similarly, snap the new bulb into place and it will become one with the connector. Put the lid back on and close everything.


Posted on 22 February 2024 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos