Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir on an Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Checks and maintenance

To replace the coolant reservoir on an Audi TT, open the hood to access the engine compartment. Next, remove the plastic cover located on the passenger side to access the coolant reservoir. Disconnect the hoses attached to it by loosening the clamps; also, disconnect various connectors and remove the mounting bolts. Once the old reservoir is removed, install the new replacement part by connecting it to the hoses and connectors.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Radiator Fluid on Audi TT
Replacing Radiator Fluid on Audi TT
Audi Tt (1998-2006 / 8N, MK 1) In this simple and effective video tutorial, learn how to replace the old coolant in the Audi TT. First, remove the old fluid: position yourself unde…
Replacing the Coolant Temperature Sensor on the Audi TT 1.8T
Replacing the Coolant Temperature Sensor on the Audi TT 1.8T
Audi Tt (1998-2006 / 8N, MK 1) In this short and simple guide, learn how to remove and replace the coolant temperature sensor on the Audi TT 1.8T. First, open the hood of your car …
How to prevent water from entering the tank of the Audi TT MK1
How to prevent water from entering the tank of the Audi TT MK1
Audi Tt (1998-2006 / 8N, MK 1) The youtuber, in this video, warns us of a potential problem that can affect all cars of this type, just as it affected his own. It is a small thing,…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos