Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the headlight on the Audi A6 C5

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Headlight

In this video tutorial we will see how to disassemble and replace the headlight on the Audi A6 C5, following the instructions below. First of all we open the bonnet of our car and we go to unscrew the screws that we find on the upper part of the light, using a torx screwdriver; after which we disconnect the tabs and the electrical connector of the light bulb that we find on the back of the headlight, as shown in the video. At this point we can definitively remove the headlight by accessing the bulbs; then let's reassemble everything, following the video tutorial until the end!

Posted on 26 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight of the Audi A6
Replacement of the front headlight of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today we will discover the guide that will allow us to disassemble and replace the front headlight assembly of the Audi A6. First, we open the engine…
Removing the Audi A6 headlight bulbs
Removing the Audi A6 headlight bulbs
Audi A6 (2004-2012 / C6, MK 3) Are the headlight bulbs burned out? Let's see how they disassemble on Audi A6. We open the front hood by pulling the lever located at the bottom righ…
Removing the headlight bulbs on the Audi A6
Removing the headlight bulbs on the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Are the headlight bulbs burned out? Let's see how they change on Aud A6. We open the front hood, pulling the lever located at the bottom right of the…

Other guides you may be interested in

How to Replace the Timing Belt on a Peugeot 206

First, release the bonnet from the lever and lift it. Access to the belt is easier from the front right wheel, so remove it. Now disconnect the battery cables. Once the wheel is completely removed, you will also need to remove the brake to work from underneath your vehicle. Unscrew the tensioner and the lower pulley cover, allowing you to comfortably extract the new belt in position. Now simply retrace the steps described above to reassemble the various components.

Watch the video!


by ScegliAuto

More videos