Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How do you remove the Audi A4 lock actuator?

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Lock
Operation: How do you remove the Audi A4 lock actuator?

In order to replace the Audi A4 lock actuator, the door panel must be removed beforehand. To do this, it will be necessary to unhook the two moldings on the panel and loosen the screws below. Once the screws have been loosened, it will be possible to unhook the panel and disconnect its connectors. This will allow you to unscrew the bolts that secure the actuator and remove it from its housing, after it has also been disconnected from its cables. Once the old actuator has been removed, it will be possible to replace it with a new spare part and install all the parts previously removed.


Posted on 10 March 2024 by ScegliAuto

    Frequently Asked Questions

    • A4 2004-2008 - Where is the lock fuse located in the 2005 Audi A4? Read Answer
    • A4 2004-2008 - Where is the lock fuse located in the 2005 Audi A4? Read Answer
    • A4 2004-2008 - How do you remove the ignition block of the Audi A4? Read Answer
    • A4 2004-2008 - How to fix the Audi A4 lock problem? Read Answer
    • A4 2007-2016 - Why does the Audi A4 lock not work? Read Answer
    • A4 2007-2016 - What are the problems with the lock of the Audi A4 b8? Read Answer
    • A4 2007-2016 - What to do in case of problems with the lock of the Audi A4? Read Answer
    • A4 2007-2016 - Problems with the lock on Audi A4 b8, what to do? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos