Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Audi A4 B8 Navigation System?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

If the MMI 3G navigation system in your Audi A4 B8, also applicable to other Audi models, stops working, freezes, or shows signs of malfunction, you can attempt a reset by following the procedure shown in the attached tutorial. This is a very simple and quick procedure that requires pressing three buttons on the center console simultaneously.

With the ignition on, start by holding down the button at the top with the arrow pointing to the right, while simultaneously pressing the "setup" button and finally the large circular center button. It is important to start with the button with the arrow, as starting with either of the other two will activate the function of that button.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on an Audi A4?
How to Reset the Service Light on an Audi A4?
Audi A4 (2004-2008 / B7) As we can see in this tutorial, resetting the service light on an Audi A4 is an extremely simple and quick operation. Before proceeding, ensure you h…
How to reset the service light on an Audi A4
How to reset the service light on an Audi A4
Audi A4 (2007-2016 / B8) The service light on the Audi A4 can be reset from the onboard computer menu. To do this, use the button panel located on the center console, near th…
How to Reset the Service Light in Audi A4?
How to Reset the Service Light in Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial, you will see how to reset the service light in the Audi A4, a very simple and quick operation to perform only after completing all …

    Frequently Asked Questions

    • A4 2007-2016 - What does the yellow engine warning light mean in the Audi A4? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos