Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to removing the horn on the Audi A3 Sportback MK3

Model: Audi A3 Sportback MK 3 - Years 2012-2019

In this guide we will see the instructions that will allow us to remove and replace the horn on the Audi A3 Sportback third series. First of all, let's find our spare part, which we find behind the bumper on the front left side; It is necessary to disassemble the bumper itself, thus unscrewing the upper fixing screws and those found on the wheel arches. At this point we are going to disconnect the horn electrical connector by unscrewing the nut of the bracket; then let's remove it and replace it with the new one, applying the reverse procedure of disassembly!

Posted on 27 November 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the air vents of the Audi A3 Sportback
Replacement of the air vents of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) We see in this guide the instructions that will allow us to disassemble and replace the air conditioning vents or diffusers of the Audi A3 Sportback.…
Location and diagram of the fuses of the Audi A3 Sportback
Location and diagram of the fuses of the Audi A3 Sportback
Audi A3 Sportback (2012-2019 / MK 3) Let's see in this guide where to find the fuse boxes and the diagram of the Audi A3 Sportback, following these simple steps. First we go to find the …
How and when to change the timing belt on the Audi A3 Sportback 1.6 TDI
How and when to change the timing belt on the Audi A3 Sportback 1.6 TDI
Audi A3 Sportback (2012-2019 / MK 3) Let's see in this guide how and when to change the timing belt of the Audi A3 Sportback; in general, the belt should be replaced in an interval betwe…

How to Replace the Fog Light Bulb on a Renault Scenic

Let's see how to replace the fog light bulb on a Renault Scenic. Lift the car onto a column lift and secure it. Prepare to remove the plastic cover at the bottom of the engine using a suitable socket wrench, reaching the side fog light located in the bumper. After removing the bulb holder, take out the damaged bulb and fit a new one (same size and voltage). Refit the plastic cover under the car's bumper with the attached pins. Test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos