Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the rear seat belts on the Audi A3?

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Checks and maintenance

In order to replace the seat belts of the rear seats on the Audi A3, the backrests of the aforementioned seats must be lowered with the special levers located near the headrests. Once the backrests have been lowered, the cushions can be detached simply by releasing their fastening clips. This will allow you to loosen their screws underneath, which secure the seat belts. The other fixing screws are located under the covers of the side walls of the luggage compartment: here you will also find the coil, which once released from its screws can be removed by removing the entire seat belt.

Posted on 12 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Audi A3
How to remove the rear seats of the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Today we will see the main instructions useful for disassembling the rear seats of the Audi A3, but also of the Volkswagen Golf. First, we open the r…
How do you replace the seat belts on the Audi A3?
How do you replace the seat belts on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) In order to remove the seat belt from the front seat of the Audi A3, you have to remove all the pillar cover, lifting it with an object that acts as …
How to remove the rear seats of the Audi A3
How to remove the rear seats of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) The following steps will illustrate the process of disassembling and replacing the rear seats of the Audi A3, following the instructions below. First…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos