Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the rear headlight Audi A5

Model: Audi A5 8T3, 8F, 8T8, 8T - Years 2007-2016
Part: Tail light

In today's video tutorial we will see how to remove the rear light of an Audi A5. First we open the boot lid and remove the side cover covered with carpet; then we are going to unscrew the plastic screw of the light. At this point we can extract the light from the outside, trying not to force too much, as shown in the video; we disconnect the connectors of the bulbs (and the bulbs themselves) to permanently remove and replace the light with the new one. We just have to replace, if desired, the bulbs and apply the reverse procedure for reassembly!

Posted on 13 December 2021 by ScegliAuto

This video is currently unavailable

Related tutorials

Audi A5 removing the headlight
Audi A5 removing the headlight
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) Does the headlight need to be changed because it is damaged? Let's see the disassembly of the front headlight of an Audi A5. We raise the front hood …
How to remove the rear light of an Audi A5
How to remove the rear light of an Audi A5
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) Before we can start, we will have to go to open the tailgate of our Audi A5. So let's start by disengaging and moving the internal side cover of the …
Replacing the Fuel Pump on the Audi A5
Replacing the Fuel Pump on the Audi A5
Audi A5 (2007-2016 / 8T3, 8F, 8T8, 8T) This guide provides the main instructions for removing and replacing the fuel pump on the Audi A5. The low-pressure fuel pump is located under the re…

Remove a Rear Light from a Volkswagen Touran

Remove a rear light from a Volkswagen Touran to replace the damaged bulbs. Open the boot lid, and using a lever, remove the plastic cover of the rear light. Unscrew the securing bolts located at the side of the rear light with a screwdriver (using a socket spanner or screwdriver with a bit). Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, reassemble the light and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos