Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing iPhone, iPod, and AUX in Your Car Radio

Model: Audi A4 B6 - Years 2000-2004
Part: Accessory kit

Connecting some devices to your car radio depends on how old and equipped it is. You can connect these devices to the car radio via the AUX input, as long as they have a minijack output. Once you have the cable, you can proceed to remove the car radio. Pull the panel and take it out. There should be a wiring diagram on it. Run the cable to connect your devices (iPhone, iPod, etc.). You can route it out from the glove compartment or under the car radio so that the device remains in front of the gear shift and is convenient to use.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of iPod Accessory Kit and Disassembly of Car Radio
Installation of iPod Accessory Kit and Disassembly of Car Radio
Audi A4 (2000-2004 / B6) Using the appropriate tools that fit into the slots above and below the car radio to release the retaining springs, pull out the complete console and…
Installation of Aftermarket Car Radio
Audi A4 (2004-2008 / B7) The first step is to attach the anchoring tabs to the new car radio using the appropriate pre-drilled bracket. Then, slide the car radio into the bra…
Installing an Aux Input Adapter
Installing an Aux Input Adapter
Audi A4 (2004-2008 / B7) To install the Aux output adapter to the original car radio, first, you need to remove the radio itself: for this operation, you will need the approp…

Replacing H7 Bulb in an Opel Meriva

Are the front headlight bulbs of your Opel Meriva out? Let's see how to proceed with the removal in this tutorial video. Open the bonnet and secure it, then remove the inspection caps from the headlights (at the back of the headlights) using a screwdriver or pliers. Disconnect the bulb holders from the headlight and disconnect the relevant power connectors. Replace the damaged bulbs with new ones (same size and voltage). After replacing the bulbs, refit the bulb holder into the headlight housing. Finally, close the back of the headlights with the inspection caps. Test the correct functioning of the lights by turning on the ignition.

Watch the video!


by ScegliAuto

More videos