Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Remote Battery on Audi A4 B6

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

If you think it's time to replace the battery in your Audi A4 remote, this guide will provide all the instructions in a few simple steps, allowing you to do it yourself. Separate the two halves of the key by pulling firmly on both ends.

The metal key will detach from the battery housing, which you can open by separating the two sections. Inside, you will find the battery compartment; simply remove the old batteries and place in the new ones.

Note that this model requires two CR2032 batteries, commonly available at a hardware store or supermarket.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) In this short video, see how to disassemble and replace the remote battery on the Audi A4 B8, as well as on the A5 Sportback and A6 in simple and qui…
Audi A4 (2014-2024 / B9) Replacing the key/remote battery of the Audi A4 is a fairly simple task. First, take the remote itself and extract the actual metal key (it is locate…
Audi A4 (2000-2004 / B6) To change the battery for the Audi A4 remote, start by inserting a small flathead screwdriver into the slot under the manufacturer's logo and pry off…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos