Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery for the Audi A4?

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

To change the battery for the Audi A4 remote, start by inserting a small flathead screwdriver into the slot under the manufacturer's logo and pry off the lower part of the remote. Once the lower part is removed, open the section with the buttons and locate the battery.

Use the flathead screwdriver to pry it out from the bottom. Place the new battery in the same position as the old one. Close the button section of the remote until you hear a click, then attach the lower part to the top until you hear another click.

Finally, test the new battery.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Audi A4 (2014-2024 / B9) To replace the key fob battery in an Audi A4, use a tool as a lever to lift the cover on the front of the fob, located just below the manufacturer's …
Audi A4 (2014-2024 / B9) To replace the key fob battery on an Audi A4, press the button on the top of the device to remove the key. Once the key is removed, you will find the…
Audi A4 (2014-2024 / B9) Today's step-by-step guide will show you how to disassemble and replace the battery in the key fob for the Audi A4. First, take your key fob and remo…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos