Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to check the engine oil level in the Audi A4?

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Engine oil
Operation: How to check the engine oil level in the Audi A4?

Checking the engine oil level in the Audi A4 B8 is a very simple and fast operation, in this video we can see how to proceed. This operation must be carried out with the engine off and cold, in order to avoid burns and in any case to have a correct reading of the level. We then proceed by opening the hood and locating the control rod, we will be able to recognize it by the presence of the yellow ring. Once extracted completely, clean it with absorbent paper, reinsert it all the way and take it out again. If the level indicated is approximately halfway between the two gauges, it means it is not necessary to add engine oil. On the contrary, if it is too low, we add oil from the special cap placed on the head of the engine.


Posted on 18 April 2024 by ScegliAuto

    Frequently Asked Questions

    • A4 2007-2016 - What is the correct amount of motor oil for the Audi A4 2.0 TDi? Read Answer
    • A4 2007-2016 - What is the amount of motor oil that goes into the Audi A4 B8 2.0 TDI? Read Answer
    • A4 2014-2023 - What is the right amount of motor oil for the Audi A4 3.0 TDI? Read Answer
    • A4 2014-2023 - What is the correct amount of motor oil for the Audi A4? Read Answer
    • A4 2000-2004 - Why did the oil light come on in the Audi A4? Read Answer
    • A4 2004-2008 - How much engine oil is needed for the Audi A4 3.0 tdi? Read Answer
    • A4 2000-2004 - Audi A4 1 9 TDI 130hp engine oil quantity? Read Answer
    • A4 2004-2008 - Where is the Audi A4 engine oil level sensor located? Read Answer
    • A4 2007-2016 - Where is the oil dipstick located in the Audi A4 B8 engine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos