Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Fuse box

The fuse box of the Audi A4 B6 is rather hidden and well integrated within the dashboard. This choice was used in order to guarantee greater protection and durability to all the various fuses as well as greater safety for the occupants of the car. In this our new mini guide we will find out where it is located. First, be sure to disconnect the car battery and park it on a level surface. Then open the driver's door and locate a small plastic door in the lower part of the dashboard. Remove it and immediately below you will find the fuses.

Posted on 16 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Audi A4 located?
Where is the fuse box of the Audi A4 located?
Audi A4 (2007-2016 / B8) The Audi A4 model B8 has two fuse boxes and one relay box inside. The fuse box and the relay box are located inside the cabin, with the first fuse bo…
What are the fuse diagrams of the Audi A4 B6?
What are the fuse diagrams of the Audi A4 B6?
Audi A4 (2000-2004 / B6) In the example shown in the video, we see how important it is to be aware of the location of the fuse box in your car, as in case of a fault, we are …
Fuse positioning and diagram of the Audi A4.
Fuse positioning and diagram of the Audi A4.
Audi A4 (2004-2008 / B7) In the following steps, we will see how to identify the fuse box and diagram of the Audi A4, following these simple steps. First, we locate the inter…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fog light fuse located in the Audi A4? Read answer

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos