Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Buttons from an Audi A3, A4, A5

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Steering wheel

See other generations:
Video tutorial

In this video, you will learn how to remove the steering wheel buttons from an Audi A3, A4, A5. Using two small screwdrivers, apply slight pressure inside the four slots located on each side of the button block. Once the tabs are loosened, push the button block outwards.

After extracting the button block, gently remove the electronic board resting on the buttons and take out the button you wish to replace by pressing the tabs that hold it in place. Handle the screwdriver carefully to open the tabs without breaking them.

After removing the affected button(s), insert the new one in its place by pushing it into its housing.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Controls on an Audi A3?
How to Remove the Steering Wheel Controls on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To remove the steering wheel controls on the Audi A3, you must first remove the steering wheel itself from its housing. To do this, rotate it left an…
Install Multifunction Steering Wheel Controls and Tiptronic Paddles in AUDI A3
Install Multifunction Steering Wheel Controls and Tiptronic Paddles in AUDI A3
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, you can see how to install multifunction steering wheel controls and Tiptronic paddles in an AUDI A3 that lacks steering whee…
Removing the Steering Wheel from an Audi A3 MK2
Removing the Steering Wheel from an Audi A3 MK2
Audi A3 (2003-2013 / 8P, MK 2) Here’s how to remove the steering wheel from an Audi A3: starting from the central position, rotate the steering wheel ninety degrees to the right, a…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos