Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Install Multifunction Steering Wheel Controls and Tiptronic Paddles in AUDI A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Onboard computer

In this video tutorial, you can see how to install multifunction steering wheel controls and Tiptronic paddles in an AUDI A3 that lacks steering wheel controls. First, get inside the car and start the engine, then turn the steering wheel 90°. Now, disengage the airbag using a lever behind the steering wheel, then turn the steering wheel to the right, opposite to the previous position (also 90°). Now, disengage the airbag on the other side and remove the airbag, then disconnect the airbag connector. Next, remove the steering wheel from its position. You can then install the steering wheel controls, disengaging the trim ring first.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Controls on an Audi A3?
How to Remove the Steering Wheel Controls on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To remove the steering wheel controls on the Audi A3, you must first remove the steering wheel itself from its housing. To do this, rotate it left an…
How to Remove the Climate Control Buttons from an Audi A3?
How to Remove the Climate Control Buttons from an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To remove the climate control buttons from the Audi A3, use a tool to lever off the plastic cover surrounding the hazard light button, located above …
How to Replace the Fuel Flap Actuator on an Audi A3?
How to Replace the Fuel Flap Actuator on an Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In this tutorial, see how to replace the fuel flap actuator on an Audi A3 8v. This is a very simple operation; you will need a screwdriver and some t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos