Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag on an Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Airbag

Discover how to remove and replace the steering wheel airbag on an Audi A3 in this brief and simple guide, following the instructions below. First, get into the vehicle and start unscrewing the fastening screws located behind the steering wheel. Lower the steering wheel using the lever to access them, as shown in the video. At this point, remove the airbag from the steering wheel by disconnecting the electrical connector at the back. Unscrew the central screw of the steering wheel if you wish to remove it as well, applying the reverse procedure for reassembly!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel of an Audi A3
How to Remove the Steering Wheel of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to disassemble the steering wheel of an Audi A3? Follow these steps for removal. Before removing the airbag from the steering wheel, disconnect t…
How to remove the steering wheel airbag of the Audi A3
How to remove the steering wheel airbag of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) .. Today we will explain how to remove the steering wheel airbag on an Audi A3 model 8V. To remove the airbag, first we need to.. …
Removing Airbag on Audi A3, A4, A5
Removing Airbag on Audi A3, A4, A5
Audi A3 (2003-2013 / MK 2, 8P) In this video tutorial, you will see how to remove the steering wheel airbag on various Audi models (A3, A4, A5, etc.) in simple steps. First, get in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos