Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Audi A4

Model: Audi A4 B5 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Front bumper

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the front bumper of the Audi A4, following the instructions below. First, open the hood of your car and start by removing the bumper grille; then, unscrew the fastening screws of the small plastic fog light grilles to remove them, as shown in the video.

At this point, remove the clips located on both sides of the front wheel wells and unscrew the torx screws found underneath the bumper; pry on the sides to detach it until it is completely removed, following the video to the end!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to remove the front bumper of the Audi A4
How to remove the front bumper of the Audi A4
Audi A4 (1994-2000 / B5) In a few simple steps, we will see the disassembly and replacement of the front bumper of the Audi A4, following the instructions below. First, open …
How to remove the front bumper of the Audi A4
How to remove the front bumper of the Audi A4
Audi A4 (2007-2016 / B8) Below are the instructions that will allow you to remove and replace the front bumper of the Audi A4 by following these simple steps. First, open the…
Removing the Front Bumper from the Audi A4
Removing the Front Bumper from the Audi A4
Audi A4 (2007-2016 / B8) The steps in this guide will show you how to remove and replace the front bumper on the Audi A4. First, open the hood of the vehicle and begin unscre…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos