Do it yourself
Frequently asked questions about cars and motorcycles

Removal and Replacement of the Main Seal

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Engine

See other generations:
Video tutorial

This video shows how to remove and replace the main seal of our car's engine. The main seal acts as a seal between the end of the engine's transmission.

Before proceeding with the removal, adjust the camshaft to the top dead center position. Next, for the removal of the seal, you will need a specific tool that ensures the proper installation of the new replacement part, thus avoiding unpleasant leaks in the future.

Once the new main seal is installed, reassemble everything and check for proper operation.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) This guide outlines the procedure to remove and replace the crankshaft seal on the Audi A4 2.0 TDI. To access and remove the seal, you need to detach…
Audi A4 (2000-2004 / B6) If you need to replace the timing belt, you must remove the entire front cover of the vehicle because the timing components are located at the front,…
Audi A4 (2000-2004 / B6) The video provides an overview of the steps to take for replacing the timing belt, although it all stems from a poorly executed repair that caused a …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos