Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Crankshaft Seal on the Audi A4 2.0 TDI

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

This guide outlines the procedure to remove and replace the crankshaft seal on the Audi A4 2.0 TDI. To access and remove the seal, you need to detach the engine block from the chassis by disconnecting the belts and removing the engine mount. Disconnect the hoses and pipes from the cooling system and remove the crankshaft pulley.

At this point, remove the oil pan ring, replace the old seal with a new one, and install the original seal. Finally, reassemble the timing components and the entire engine!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Replace the Camshaft Sensor on Audi A4 2.0 TDI
How to Replace the Camshaft Sensor on Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) In this video tutorial, you will learn how to remove and replace the camshaft sensor on the Audi A4 2.0 TDI in simple steps. First, open the hood of …
Camshaft Sensor Replacement on Audi A4
Camshaft Sensor Replacement on Audi A4
Audi A4 (2007-2016 / B8) This short video shows the replacement of the camshaft sensor. The compatible camshaft sensor codes for this vehicle are P0341 and P0343. Lift the ho…
Removal and Replacement of the Main Seal
Removal and Replacement of the Main Seal
Audi A4 (2000-2004 / B6) This video shows how to remove and replace the main seal of our car's engine. The main seal acts as a seal between the end of the engine's transmissi…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos