Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A4
  6. : How to replace the camshaft sensor of the Audi A4 2.0 TDI.

Audi A4 - Video tutorial

Model: Audi A4 B8 - Years 2007-2016
Part: Crankshaft RPM sensor
Operation: How to replace the camshaft sensor of the Audi A4 2.0 TDI.

In this video tutorial, we will see how to dismantle and replace the camshaft sensor of the Audi A4 2.0 TDI, in simple steps. First, we open the hood of the car and start locating the camshaft sensor, which we find next to the engine oil cap. Then, we unscrew its fixing screw and disconnect the electrical connector to remove the sensor, as shown in the video. At this point, we proceed to install the new camshaft sensor, as well as the original one. We make the electrical connection and secure it with the original screw!


Posted on 14 December 2023 by ScegliAuto

    Frequently Asked Questions

    • A4 2007-2016 - Why does the speed sensor of the Audi A4 fail? Read Answer
    • A4 2000-2004 - How much does the engine speed sensor cost on an Audi A4? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos