Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery in an Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Key

To replace the battery in the Audi Q3 remote, press the button located at the top of the device to release the emergency key. Once the key is out of its slot, pry inside to remove the plastic front cover. Underneath, you will find the battery, which can be pulled from its housing and replaced with a new part. After replacing the battery, reinsert the cover, lower the key, and check that the device functions correctly.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of the Audi Q3
How to Replace the Key Fob Battery of the Audi Q3
Audi Q3 (2011-2018 / 8U) In this video tutorial, you will learn how to disassemble and replace the battery of the key fob for the Audi Q3, following the instructions below. F…
How to Replace the Remote Battery in an Audi Q3
How to Replace the Remote Battery in an Audi Q3
Audi Q3 (2011-2018 / 8U) To replace the remote battery in the Audi Q3, press the button located on the chrome part at the top of the remote. By pressing this button, the chro…
How to replace the battery in the Audi Q3 key remote.
How to replace the battery in the Audi Q3 key remote.
Audi Q3 (2011-2018 / 8U) Today, let's discover the steps that will allow us to disassemble and replace the battery of the Audi Q3 key remote. First, take the remote in hand a…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos