Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Light bulb

In order to replace the Audi A3 headlight bulb, you have to lift the car using a jack or a bridge and you will have to unscrew the screws that secure the side of the front bumper and the inner cover of the wheel arch corresponding to the bulb to be replaced. Once the wheel arch has been removed, the circular cap from the rear of the headlight can be removed, so that the bulb inside can be removed and replaced with a new one. After this has been connected to the connector, it will be necessary to close the headlight and reposition the wheel arches and bumpers.

Posted on 27 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Audi A3?
How to replace the headlight bulb on the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) In order to replace the headlight bulb of the Audi A3 you have to go to lift the car and loosen the bolts that secure the front wheel which is on the…
How to change headlight bulb on Audi A3
How to change headlight bulb on Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Change the headlight bulb of an Audi A3? Let's see the dismantling of the bulb. Let's open the front hood and lift it up. We find the headlight cover…
How to replace the front turn signal bulb of the Audi A3
How to replace the front turn signal bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the front turn signal bulb on an Audi A3 model 8p. To perform the bulb replacement, we need to open the front ho…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos