Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B6
- Years 2000-2004 Very often, immediately after starting the car, it can happen that you find yourself with a service message that appears on the mini display. It does not in itself represent a real problem nor does it signal malfunctions, but it can be equally annoying and for this reason it must be removed. The steps to take are really simple and take a couple of minutes to complete. First, press the button with a wrench depicted above it, located on the right side of the dashboard. Immediately afterwards, hold down the button on the side for a few seconds (with the two zeros shown). The reset should have been successful, but to confirm it you have to turn the ignition off and on again. If you see an "ok" message then you have successfully performed the procedure. Otherwise you can safely repeat it.
Posted on 7 July 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |