Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Heater Radiator in an Audi A2?

Model: Audi A2 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Heater core

Video tutorial

In the following video, we will see in general terms how to change the internal cabin radiator for air heating in the Audi A2. This procedure is quite complex and requires a timeframe of 6-7 hours. Indeed, to replace the radiator, you need to dismantle a large part of the car's interior, as demonstrated in the video.

Additionally, during this process, there is a significant coolant spill, so it is advisable to have a cloth or plastic material to prevent it from getting on the carpet or reaching other electronic components. Once the radiator is replaced, ensure to check the coolant level outside, as there may be leaks during this process.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Replace the Indicator Relay on an Audi A2
How to Replace the Indicator Relay on an Audi A2
Audi A2 (1999-2005 / MK 1) In today's video, we will see the instructions to remove and replace the indicator relay on an Audi A2 in simple steps. First, get inside the vehicle…
How to Replace the Battery on an Audi A2?
How to Replace the Battery on an Audi A2?
Audi A2 (1999-2005 / MK 1) To replace the battery on an Audi A2, lift the rear hatch to access the boot. Here, you can lift the carpet that serves as flooring and then open the…
Where are the fuses located in the Audi A2?
Audi A2 (1999-2005 / MK 1) Any fuse of the Audi A2 is located inside the only fuse box installed on the car: this will be located in the rear of the vehicle, inside the trunk. …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos